GE ZVC42, ZVC48 Parts Provided, Check Installation Hardware, Remote Mounting of the Control Wired

Installation Preparation

PARTS PROVIDED

Locate the parts packed with the hood.

CHECK INSTALLATION HARDWARE

Count screws/ components. Screws shown actual size.

6 wood screws for

hood liner 8 wood

screws for

insert

sleeve

2 wing nuts

with lock

washers for

blower motor

5 nuts for damper plate

assembly

(not located in hardware bag–you must save nuts when you remove damper plate from inset hood while unpacking parts)

6 insert sleeve chassis plugs, 1 (optional) house wire hole plug, 2 rubber grommets, 4 insert sleeve washers

REMOTE MOUNTING OF THE CONTROL (WIRED)

Hood liner (packed in

separate carton)

Insert sleeve

Filters

Blower motor

(30″ and 36″ Wide Models)

Blanking plate for

remote control

opening*

*NOTE: To be used on custom hood when controls are remotely mounted.

Control wall bracket

Control Control mounting mounting

plate bracket

Connector/

Converter

Dual blower motor

(42″ and 48″ Wide Models)

30 ft. of 4-wire cord
(straight-pinned)
with connector/converter	2 mounting plate	2 wall
NOTE: Not for	screws	bracket
telecommunications		screws
(telephone) network.

Damper plate

12