Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM.
SHUFFLE . . . . . . . . . . tracks of the entire CD/ programme are played in random order
SHUFFLE and
REPEAT ALL . . . . . . . . to repeat the entire CD/ programme continuously in random order
REPEAT ALL . . . . . . . . repeats the entire CD/ programme
continuously
REPEAT . . . . . . . . . . . repeats the current track continuously
1To select your play mode before or during playback, press either
•on the remote control SHUFFLE or REPEAT
•on the set CLOCK repeatedly until the display shows the desired function.
2Press 2; to start playback if in the STOP position.
™If you have selected SHUFFLE, playback starts automatically.
3To return to normal playback, press the respective SHUFFLE or REPEAT button until the various
SHUFFLE/ REPEAT modes are no longer displayed.
– You can also press 9 to cancel your play mode.
MC158 COMPACT | |
| AUDIO SYSTEM |
| OPEN |
| CLOSE |
CD | D B B |
| |
SHUFFLE |
|
PROGRAM |
|
| PRESET |
| TUNING |
Programming track numbers
Programme in the STOP position to select and store your CD tracks in the desired sequence. If you like, store any track more than once. Up to 40 tracks can be stored in the memory.
1Press PROGRAM on the set or remote control to enter the programming mode.
™A track number is shown and PROGRAM flashes.
2Use the ¡1 or 2™ on the set, (on the remote control ¡ or ™) to select your desired track number.
3Press PROGRAM to confirm the track number to be stored.
™The number of tracks programmed and total playing time of the programme is shown briefly, then the selected track and PROG.
™… : … is shown if total playing time is 100 minutes or more.
4Repeat steps
™FULL is displayed if you attempt to programe more than 40 tracks.
5To start playback of your CD programme, press 2; .
Reviewing the programme
•In STOP mode, press and hold down PROGRAM on the set or remote control, until the display shows all your stored track numbers in sequence.
Erasing a programme
You can erase the programme by:
–pressing 9 once in the STOP position;
–pressing 9 twice during playback;
–opening the CD tray.
•CLEARED is shown briefly and PROGRAM disappears from the display.
9
English