Care and Cleaning
Removing Oven Door | Replacing Oven Light |
CAUTION
To avoid damaging oven door, do not lift or move range by oven door handle. Glass can break.
To avoid personal injury or property damage, handle oven door with care.
•Door is heavy and can be damaged if dropped.
•Avoid placing hands in hinge area when door is removed. Hinge can snap closed and pinch hands.
•Do not scratch or chip glass, or twist door. Glass may break suddenly.
•Replace door glass if damaged.
1.Open door.
2.Remove screws on each side of lower oven door.
3.Close door to first stop.
4.Grasp door firmly on each side and lift upward until door is off hinges.
•Do not lift door by handle. Glass can break.
•Only push hinges closed once oven door is removed if necessary. Use both hands when closing hinge. Hinge snaps closed.
WARNING
To avoid risk of burns or electrical shock, disconnect electrical supply to range before changing light bulb.
•Before replacing light bulb make sure bulb is cool.
•Wear protective gloves.
•Do not operate oven without bulb and cover in place.
1.Disconnect electrical supply.
2.Remove oven door if desired.
3.Unscrew light bulb cover and then light bulb. Turn counterclockwise.
4.Replace light bulb with 120 volt, 40 watt appliance bulb.
•Do not overtighten bulb or light bulb cover. They may be difficult to remove later.
5.Replace light bulb cover and oven door before use.
6.Reconnect power supply.
22