3Com 3101SP manual Using Feature, Codes, 3Com Basic, Pick up the handset Press the Feature button

	Using Feature Codes 125
	for the entire system, some of these features may not be available to
	you.
3Com Basic	Some of the features that are listed in Table 11 are already available in
Telephone	single-purpose buttons on 3Com Basic Telephones like Hold, Volume
	Control, Message, and the Scroll buttons that you use to search the
	directories.
	The 3Com 2101 Basic Telephone has three programmable buttons that
	are set (from left to right) at the factory to Feature, Call Toggle, and
	Transfer. On the 3Com 3101 and 3101SP Basic Telephones, the first two
	(from left to right) programmable buttons are line appearance buttons
	and the next two buttons are set to Feature and Transfer. Your
	administrator can change the programming on these buttons, although
	changing them might limit which NBX features you can use on your
	telephone.
	For all other NBX features, use the preprogrammed Feature button and
	the feature codes listed in Table 11.
Using Feature	Follow these steps to use NBX feature codes:
Codes

	1	Pick up the handset.
	2	Press the Feature button.
	3	Dial the feature code and any additional values as specified in Table 11.
	4	Hang up when your call is complete or you have activated the features
		that you want.
Table 11 NBX Feature Codes
Feature		Feature Code	See
Account Codes		F + 888 + account code + # + telephone	“Account (Billing) Codes” in Chapter 7
		number
ACD, Hunt, and Calling		F + feature code for the group + group	“Automatic Call Distribution Groups,
Groups		password + #	Hunt Groups, and Calling Groups” in
			Chapter 7
Automatic Callback		F + 469 + hang up	“Using Automatic Callback” in
			Chapter 5
Call Forward All		F + 465	“Forwarding Incoming Calls” in
			Chapter 5