3Com 3101SP manual Call Park, WhisperPage session ends, Give during your announcement

Call Park 109

More About WhisperPage

These usage tips and limitations apply to WhisperPage:

■The WhisperPage listener can refuse or end a WhisperPage session at any time by activating Do Not Disturb.

■You cannot initiate a WhisperPage session to:

■A Supervisory Monitoring call

■A call that is on hold

■ While using WhisperPage, if either the listener or the other party on

	the call invokes Transfer, Park, Conference, or Forward to VM, the
	WhisperPage session ends.
	■ You can start up to two simultaneous WhisperPage sessions, one or
	both on hold, providing you have a line available for each session.
	For additional tips and considerations on using WhisperPage, see your
	system administrator.
Call Park	Use Call Park to place a call in a “holding pattern” and make it available
	for another person to pick up from any telephone on the system. Use the
	internal paging feature, the external paging feature, or both, to
	announce the call. The recipient can retrieve the call from any 3Com
	telephone or analog telephone by dialing the Call Park extension that you
	give during your announcement.

This feature is useful in any of these circumstances:

■The recipient is elsewhere in the building.

■You want to continue a call on another telephone, for instance, in a conference room for privacy, and transferring the call does not give you enough time to retrieve it.

When you park a call, you assign it a Call Park extension, which anyone can use to retrieve it. Table 9 lists the default Call Park extension numbers. Ask your administrator to verify the Call Park extensions for your location.

Table 9 Default Call Park Extension Numbers

System	Default Extension Numbers
4-digit dial plan	6000 – 6099
3-digit dial plan	601 – 609