Page152 Advanced HotSync®O perations
6. TapOK.

Performing a HotSync operation via a modem

Afteryou prepare your deskto p/laptop computer and your handheld
computer, and select your Conduit Setup options, you are ready to
performamodemHotSyncoperation.
Toperform a modem HotSync operation:
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tapthe Modem icon todial the Palm Desktop modem and
synchronizethe applications.
4. Wait for the HotSync operation to complete. If you have any
problems conducting a successful HotSync operation, see
Appendix B.
Conducting a HotSync operationvia a network
When you use the Network HotSync software, you can take
advantageof the LAN and WANconnectivity available in many office
environments. The Network HotSync software enables you to
performaHotSyncoperationbydialingintoanetworkorbyusinga
cradleth atis connected to any computer on your LAN or WAN
(providedthat the computer connected to the cradle also has the
Network HotSync software installed, your computer is on, and the
HotSync Manager is running).

Connecting to your company’s dial-in server

The Network HotSync software requires the following:
Your computer has TCP/IP support installed.
Bothyour company’s network system a nd its remote access server
supportTCP/IP. (Your System Administrator has this
information.)
You havea remote access account. (If you don’t have an account,
consult your System Administrator.)
Everythingy ou need to connect to your company’s dial-in server
(network modem) is included with your Palm Desktop software and
handheld computer software. You need to activate the feature,