Import and export data, so you can easily transfer data from other desktop applications into any of your main applications. See “Importing data” in Chapter 2 for more information.

Print your Date Book, Address Book, To Do List, and Memo Pad information on any printer.

Connecting the cradle

The cradle that comes with your TRGpro handheld computer enables you to synchronize the information on your handheld computer with the Palm Desktop software using HotSync technology.

To connect the cradle:

1.Turn off your computer and plug the cable from the TRGpro handheld computer cradle into the serial (COM) port on your personal computer.

Note: Your TRGpro handheld computer requires a dedicated port. It cannot share a port with an internal modem or other device. If you are unsure about the exact location of the serial port on your personal computer, refer to the manual supplied with the computer.

Installing Palm Desktop software

The following instructions guide you through installing Palm Desktop software. After installation, refer to the online Help in Palm Desktop software for information about how to use the software.

To ensure a safe and uninterrupted installation of Palm Desktop software, please do the following before installing:

Turn off your personal computer and connect the cradle to it. Do not place your handheld computer in the cradle until instructed.

If you are installing from diskettes (rather than the CD-ROM included in the box), make sure the original Palm Desktop

Page 22

Introduction to Your TRGpro™ Handheld Computer

Page 30
Image 30
3Com TRGpro manual Connecting the cradle, Installing Palm Desktop software, To connect the cradle