3Com TRGpro Inserting and Removing Memory Cards

Chapter8 Page199
Inserting and Removing Memory Cards
Inserting a CF memory card
1. Remove the CF card expansion slot door by pressing onto the
fingernail recess and sliding the door from the unit.
2. Begin the process of sliding the memory card into the unit. Grip
the card by its bottom edge, i.e., the edge opposite the connector
side.
3. Thegrooved sides of the card will only allow it to be inserted into
the slot one way. Placethe card onto the rails of the slot and
attempt to slide it into the unit. Ifthe card does not slide, flip the
cardaround ,m aking sure the connector-side is still facing into the
slot.
4. Slidethe memory card all the way into theslot until it fully mates
with the connector.
5. Replacethe card expansion slot door by posit ioning the two tabs in
theslot groove a nd pressing onto the fingernail recess to push the
door locked.
Removing a CF Memory Card
1. Makesu reth e handheld computer is not currently copying
informationfrom the CFmemory card.
2. Remove the CF card expansion slot door by pressing onto the