"Conducting a HotSync operation via modem" in Chapter 6 of this handbook.

Preparing your handheld computer

Inserting a CF modem card

1.Remove the CF card expansion slot door by pressing onto the fingernail recess and pulling the door off.

2.Begin the process of inserting the CF modem card into the unit. Grip the card by the edge opposite the connector side.

3.The grooved sides of the card will only allow it to be inserted into the slot one way. Place the card onto the rails of the slot and attempt to slide it into the unit. If the card does not slide, flip the card around, making sure the connector-side is still facing into the slot.

4.Slide the modem card all the way into the slot until it fully mates with the connector.

5.Set up the vendor-supplied cabling to create a connection to a standard telephone outlet.

Check your connection preferences:

1. In the Applications Launcher, tap the Preferences (Prefs) icon .

Page 210

CompactFlash™, CFpro™, and CFBackup™

Page 218
Image 218
3Com TRGpro manual Inserting a CF modem card, Check your connection preferences