2.Tap Local.

3.Tap the pick list below the HotSync icon and select IR to a PC/Handheld.

4.Position the IR port of your handheld computer within a couple of inches of the infrared port of your computer.

5.Tap the HotSync icon to start the IR HotSync operation.

Tap here to start IR HotSync operation

Returning to cradle HotSync operations

It’s easy to return to using the cradle for HotSync operations.

To return to cradle HotSync operations:

1.If necessary, connect the cradle to a serial (COM) port of your personal computer.

2.Click the HotSync Manager icon in the Windows system tray.

3.Choose Setup, and then click Local.

4.Select the COM port your cradle is connected to.

5.Click OK.

Now, the next time you want to perform a HotSync operation, just press the HotSync button on the cradle, as you always did in the past.

You can leave the HotSync application on your handheld computer set to perform IR HotSync operations and still use the cradle. This is useful if you perform HotSync operations with both your desktop computer and a laptop that you travel with. When you travel, you don’t have to carry a cradle or cable because your handheld computer is set to perform IR HotSync operations. When you’re in the office, just place your handheld computer in the cradle and press the HotSync button.

Chapter 6

Page 159

Page 167
Image 167
3Com TRGpro manual Returning to cradle HotSync operations, To return to cradle HotSync operations