A&D AD-4405 manual Functions, Off

6.2. F-Functions

Weighing Conditions (Digital Filter, Zero trucking and Stability)

Item	Parameter		Description
	0	2 d/ 1.6s
	1	4 d/ 1.6s
	2	8 d/ 1.6s
	3	16 d/ 1.6s
	4	32 d/ 1.6s
f00	5	64 d/ 1.6s	If weak filter is set, the response
Filter	6	128 d/ 1.6s	will be fast, but will be more
Motion / Averaging	7	2 d/ 3.2s	sensitive to external influences
time	**8	4 d/ 3.2s	such as vibration.
	9	8 d/ 3.2s
	10	16 d/ 3.2s
	11	32 d/ 3.2s
	12	64 d/ 3.2s
	13	128 d/ 3.2s
	0	OFF	This function traces the weight
	1	0.5 d/ 1s
			value drifting around the zero
	2	1.0 d/ 1s
			point slowly, displayed as zero. If
	3	1.5 d/ 1s
			a strong parameter is set, a very
f01	4	2.0 d/ 1s
			small zero drift may be not
	5	2.5 d/ 1s
Zero tracking			detected.
	6	0.5 d/ 2s
			If Cf00 1 is, the f01 0, 1, 6 or 7
	7	1.0 d/ 2s
			can be selected only.
	**8	1.5 d/ 2s
			If Cf00 1 is, the initial setting is
	9	2.0 d/ 2s
			f01 7.
	10	2.5 d/ 2s
	0	No motion detection	The function to set the condition
	1	0.5 d/ 0.5s	of judgment whether a weight
	2	1.0 d/ 0.5s	value is unstable or stable. The
	3	2.0 d/ 0.5s					key are
f02				ZERO	key and	TARE
	4	3.0 d/ 0.5s	active in the stable state. If these
STABLE mark
	5	4.0 d/ 0.5s	keys need to be active in the
Motion detection
	6	0.5 d/ 1s	unstable state, set to f02 0 or
condition
	7	1.0 d/ 1s	select Cf04 1 or Cf04 3. In case
	**8	2.0 d/ 1s	of Cf00 1 is, f02 6 or f02 7 can
	9	3.0 d/ 1s	be selected only. (Initial setting is
	10	4.0 d/ 1s	f02 6.)
	0	Once after the mark	Set the number of times when
f03			the STABLE mark turned on in
	1	Twice in succession
Auto Printing/			succession, until output/print out.
	*2	Three times
Auto accumulation			If Cf00 1 is set, f03 2 or f03 3
	3	Four times
			can be selected.

d:division (weighing interval) of first range. s: second. *: Initial settings.

AD-4405 Weighing Indicator Page 23 6.2. F-Functions