A&D AD-4405 manual $Dl, SF1,$ID$DN$CR$LF$GR$UT$CR$LF, ’$An$Tl$Lf$Lf, PF2,$DT$TM$LF$AN$SP$TL$LF

$DL	Inserting a DeLay time (0.1 second step)
	Example: DL10 : 1.0 second delay

Strings

Output or print specified strings enclosed by a single quotation (’).

’itself is described using three single quotations; ’’’. Example: ’A & D’ ’This is a sample of ’’’ .’

Set data bit = 8 bit if using the 8 bit characters.

Hexadecimal

Control code of the printer etc. preceded by #.

2 characters proceeded by # is hexadecimal code. Example: #09, #7C

The #FF code can not be used because it is used for internal control.

Example

SF1,$ID$DN$CR$LF$GR$UT$CR$LF

Serial output data format 1, ID number, data number, carriage return and line feed, Gross weight, unit, carriage return and line feed.

SF2,’ Welcome to A & D’$LF’Total weight	’$AN$TL$LF$LF
Serial output data format 2, the strings ’	Welcome to A & D’ and line feed,

the strings ’Total weight ’ accumulation count, total weight, and 2 sets of line feed.

PF2,$DT$TM$LF$AN$SP$TL$LF

Date and time

Line feed

Accumulation number

Total weight

Line feed

AD-4405 Weighing Indicator Page 65 16.4. UFC Command