A&D AD-4405 manual Key to register the unit weight and return to the piece

ENTER	key		The key to register the unit weight and return to the piece
			count display. The unit weight is calculated automatically
			with the weight and the number of samples.
Press the		ESC	key while pressing +/- key
			The key to return to the piece count display without changing
			the unit weight.

Notes	It is preferable to have a large number of samples, to minimize the
	counting error.
	Press the	ENTER	key after the STABLE mark turns on.

If the total weight of the samples is too light and is not adequate to be used as the unit weight, loUt is displayed for 2 seconds and returns to the registration display.

Digital input

When the unit weight is already known, digital input is available.

Step 1	Start with the normal weight mode.
Step 2	Press the	SAMPLE	key to enter the digital input of the unit the weight.	U xxx	and

the weight unit is displayed with unit pcs blinking. Using following keys:

0 - 9 key				The key to set the unit weight. Maximum is 5 digits.
+/- key				The key to select the weighing unit of the unit weight.
ZERO		................key		The key to clear the digital input.	U----	is displayed.
				The key to return to the normal weight display without
ESC	..................key
				changing the registered unit weight.
				The key to register the unit weight and return to the normal
ENTER			..............key

weight display.

Press the MODE key while pressing the +/- key The key to shift the decimal point.

AD-4405 Weighing Indicator Page 47 12. Counting Function