A&D GH-120/GH-200/GH-300/GH-202/GH-252 Clock and Calendar Function, Operation, Setting the time

RE-ZERO

10.7.Clock and Calendar Function

The balance is equipped with a clock and calendar function. When the "GLP output (info)" parameter is set to "1" or "2" and the "Time/Date output (5-td)" parameter is set to "1", "2" or "3", the time and date are added to the output data. Set or confirm the time and date as follows:

Operation

1Press and hold the RANGE key until weighing mode, then release the key.

ba5fnc

of the function table is displayed in the

2 Press the

RANGE

key several times to display

Cl adj

.

3Press the PRINT key.

The balance enters the mode to confirm or set the time and date.

Confirming the time

4 The current time is displayed with all the digits blinking.

When the time is correct and the date does not need to be confirmed, press the CAL key and proceed to step 8.

When the time is correct and the date is to be confirmed, press the RANGE key and proceed to step 6.

When the time is not correct and is to be changed, press the key and proceed to step 5.

Setting the time

5 Set the time in 24-hour format using the following keys.

RANGE key........ The key to select the digits to change the value.

The selected digits blink.

RE-ZERO(-)key....The key to increase the value by one.

MODE (+)key ....... The key to decrease the value by one.

PRINT key ......... The key to store the new setting, display

end and proceed to step 6.

CAL key............. The key to cancel the new setting and proceed

to step 6.

Store

Proceed to date confirming mode

Confirming the date

6 The current date is displayed with all the digits blinking.

To change the display order of year (y), month (m) and day (d), press the MODE key. The date is output in the order as specified.

When the date is correct and the operation is to be finished, press the CAL key and proceed to step 8.

When the time is to be confirmed again, press the RANGE proceed back to step 4.

When the date is not correct and is to be changed, press the RE-ZEROkey and proceed to step 7.

Confirm the date or change the display order

key and	Proceed to date
	setting mode

Note The year is expressed using a two-digit format. For example: The year 2004 is expressed as "04".

44