Capacity, 101 | A&D GH-120/GH-200/GH-300/GH-202/GH-252 guide

The tables below indicate the weighing capacity and the minimum display for each unit, depending on the balance model.

			GH-252
	Unit	Standard range		Precision range
	Unit	Capacity	Minimum	Capacity	Minimum
			Minimum		Minimum
			display		display
			display	101	display
	Gram	250	0.0001	101	0.00001
	Milligram	250000	0.1	101000	0.01
	Ounce (Avoir)	8.82	0.00001	3.56	0.000001
	Troy Ounce	8.04	0.00001	3.25	0.000001
	Metric Carat	1250	0.001	505	0.0001
	Momme	66.7	0.0001	26.9	0.00001
	Pennyweight	160.8	0.0001	64.9	0.00001
	Grain (UK)	3858	0.002	1559	0.0002
	Tael (HK general, Singapore)	6.61	0.00001	2.67	0.000001
	Tael (HK jewelry)	6.68	0.00001	2.70	0.000001
	Tael (Taiwan)	6.67	0.00001	2.69	0.000001
	Tael (China)	8.00	0.00001	3.23	0.000001
	Tola (India)	21.43	0.00001	8.66	0.000001
	Messghal	53.3	0.0001	21.5	0.00001

			GH-202
	Unit	Standard range		Precision range
	Unit	Capacity	Minimum	Capacity	Minimum
			Minimum		Minimum
			display		display
			display	51	display
	Gram	220	0.0001	51	0.00001
	Milligram	220000	0.1	51000	0.01
	Ounce (Avoir)	7.76	0.00001	1.80	0.000001
	Troy Ounce	7.07	0.00001	1.64	0.000001
	Metric Carat	1100	0.001	255	0.0001
	Momme	58.7	0.0001	13.6	0.00001
	Pennyweight	141.5	0.0001	32.8	0.00001
	Grain (UK)	3395	0.002	787	0.0002
	Tael (HK general, Singapore)	5.82	0.00001	1.35	0.000001
	Tael (HK jewelry)	5.88	0.00001	1.36	0.000001
	Tael (Taiwan)	5.87	0.00001	1.36	0.000001
	Tael (China)	7.04	0.00001	1.63	0.000001
	Tola (India)	18.86	0.00001	4.37	0.000001
	Messghal	46.9	0.0001	10.9	0.00001

12

Image 14

A&D GH-120/GH-200/GH-300/GH-202/GH-252 manual Capacity, 101

Contents

GH-120 GH-200 GH-300 GH-202 GH-252 1WMPD4000891CPage Contents Underhook Density Measurement Interface And Communication Introduction About This Manual Compliance With FCC Rules FeaturesCompliance Compliance With EMC DirectivesPage Unpacking the Balance Before Use PrecautionsInstalling the Balance During Use Shock Power Supply After Use Display Display Symbols and Key OperationKey When pressed and released When pressed and held Key operation Weighing Units Units 101 00001 Examples Unit Display Gram Counting mode Pcs Percent mode Densitymode Press the PrintChanging the Units Balance displays Unit setting example Read . Display symbols and Key operation before operation Precautions for the weighing operationBasic Operation Gram Mode Weighing 01mg Dual RangeWeighing range Available minimum display 1mg Counting operation Counting Mode PCSStoring a sample unit mass Weighing input mode Counting mode using the Acai function Mark turns off after Unit mass is improved Repeat Storing the 100% reference mass Percent Mode %Selecting the percent mode Reading the percentage Advise Response AdjustmentAutomatic Response Adjustment Displayed, then release the key Manual Response AdjustmentKey until Press Key again quickly Calibration Calibration Group One-Touch Calibration Automatic self calibration due to changes in temperatureAutomatic Self Calibration Mark Calibration Test Using the Internal Mass Press and hold the CAL Key until is CC Calibration Using an External Weight Key ..............The key to store the new mass value Calibration Test Using an External WeightKey................. The key To cancel the operation Even if the AC adapter is removed, Correcting the Internal Mass Value Function Switch and Initialization Permit or Inhibit Key to display Press the Print key To cancel this operation, pressInitializing the Balance Setting the Function Table Display symbol and keys Function Table Key to select a class Press Setting procedureFunction table is displayed Press Key to enter the class Key to select a item Press Setting example Details of the Function Table Data output Time/Date output Factory settingsInt ID number output ErCd 5if TimeoutAK, Error code Interface Ct5 Description of the Class Environment, Display Stream mode Description of the Item Data Output ModeKey mode Auto print modes a and B Standard format Interval memory modeDescription of the Item Data Format DP Dump print format NU numerical format KF formatMT format Data Unit Terminator Stable value Unstable value Date CSV formatData number Time Data Format Examples Positive errorNegative error Space Stable Unstable Overload Units Operation Setting the timeClock and Calendar Function Confirming the time Set the date Store Setting the dateQuitting the operation Setting the ID Number ID Number and GLP Report Key operation Calibration report using the internal massGLP Report Commad Calibration test report using an internal massBalance returns to weighing mode after this test Calibration report using an external weight Calibration test report using an external weight When using preset target value, proceed to step Weighing data Title block and end blockTitle block Releasing Clr or err Returns to the weighing modeData Memory Press and hold the Print key until the key Memory full Data Memory for Weighing DataStoring the weighing data Interval memory Additional parameter settings, as follows Setting the function tableParameter settings for each output mode are as follows Enabling the data memory function Deleting all memory data at one time Recalling the memory dataTransmitting all memory data at one time Transmitting the memory data Data Memory for Calibration and Calibration TestStoring the calibration and calibration test data Deleting data stored in memory Underhook Prior to measurement Changing the function table Density MeasurementFormula to obtain the density Density of a liquid Relation between the water temperature and density Entering the density of a liquid Press the modes Measuring the densityOutput or store Density display Turns off. lights Key to proceed to other Sub 25 pin assignments Standard Input and Output InterfaceRS-232C Interface Connection to Peripheral Equipment Connection to an AD-8121B printer Connection to a computer and the use of WinCT Using Windows Communication Tools Software WinCTUsing the WinCT software, the balance can do the following RsCom Commands Command List Settings Related to RS-232C Acknowledge Code and Error CodesControl Using CTS and RTS Command Re-zeroing the display Command ExamplesOn command turning on the balance CAL command Calibration with internal mass Error code Command ?PT command Net value Tare value Weighing with a tare Zero Command ExecutionPT command to set a target weight of 10 g Zero display Treatment of the Balance MaintenanceError Codes Automatic response adjustment zero error Sample mass errorUnit mass error Automatic response adjustment unstable error Other Display Asking for Repair Checking the Balance Performance and EnvironmentChecking that the balance performs properly Specifications External Dimensions Unit mm GH-08 Ethernet Interface Options and Peripheral EquipmentGH-02 USB interface AD-8121B Printer AX-USB-9P-EX USB Converter AD-1653 Density Determination KitAD-1683 DC Static Eliminator 9970 g/cm3 AX-SW128 Foot switch AX-T-314A-S External key Plug Other options Terms/Index Terms Index 5tart Options5pd Out Tare PU5e Memo Memo