1.2.Features

Automatic self calibration, using the internal mass, adapting to changes in temperature.

Response adjustment adapting to drafts and/or vibration automatically.

Memory function to store weighing data and calibration data.

When weighing data is stored only, 200 data can be stored in maximum. Interval memory mode to store the weighing data periodically.

Good laboratory practice (GLP) data can output using the RS-232C serial interface.

A built-in clock and calendar that can add the time and date to the output data.

Underhook, for measuring density and weighing magnetic materials.

Multiple weighing units with most of the common units used around the world.

Density mode for calculating the density of a solid.

Standard RS-232C serial interface to communicate with a computer.

Windows communication tools software (WinCT) to allow easy communication with a computer using Windows.

When multiple balances have the GH-08 Ethernet interface installed and are connected to a LAN, data can be acquired from them using the WinCT-Plus software.

1.3.Compliance

1.3.1.Compliance With FCC Rules

Please note that this equipment generates, uses and can radiate radio frequency energy. This equipment has been tested and has been found to comply with the limits of a Class A computing device pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide reasonable protection against interference when equipment is operated in a commercial environment. If this unit is operated in a residential area, it may cause some interference and under these circumstances the user would be required to take, at his own expense, whatever measures are necessary to eliminate the interference.

(FCC = Federal Communications Commission in the U.S.A.)

1.3.2.Compliance With EMC Directives

This device features radio interference suppression and safety regulation in compliance with the following Council Directives

Council directive 89/336/EEC

EN61326

EMC directive

Council directive 73/23/EEC

EN60950

Safety of Information Technology Equipment

The CE mark is an official mandatory European marking.

Please note that any electronic product must comply with local laws and regulations when sold or used anywhere outside Europe.

4

Page 6
Image 6
A&D GH-120/GH-200/GH-300/GH-202/GH-252 manual Features, Compliance With FCC Rules, Compliance With EMC Directives