A&D GH-120/GH-200/GH-300/GH-202/GH-252 Sample mass error, Unit mass error, Clock battery error

Display	Error code	Description
		Sample mass error
		The balance can not store the sample for the counting mode
		or for the percent mode because it is too light.
		Use a larger sample.
		Unit mass error
		The sample unit mass for the counting mode is too light.
		Storing and using it for counting will cause a counting error.
		Add samples to reach the specified number and press the
		PRINT	key. Pressing the PRINT key without adding
		samples will shift the balance to the counting mode. But, for
		accurate counting, be sure to add samples.
		Automatic response adjustment zero error
		The automatic response adjustment can not be performed
		because there is something on the pan. Clear the pan. Press
		the CAL	key to return to the weighing mode.
		Automatic response adjustment unstable error
		The automatic response adjustment can not be performed
		because the mass value is unstable.
(Check NG)		Check the ambient conditions such as breeze, vibration and
		magnetic fields, also check the weighing pan.
		Press the	CAL key to return to the weighing mode.
		Clock battery error
		The clock backup battery has been depleted.
		Press any key and set the time and date. The clock and
		calendar function works normally as long as the AC adapter
		is connected to the balance. If this error appears frequently,
		contact the local A&D dealer.
		Memory full
"f"U"l	(Blinking)	The amount of weighing data in memory has reached the
		maximum capacity. Delete data in memory to store new data.
		For details, refer to "12. Data Memory".
		Memory full
		The amount of calibration or calibration test data in memory
fU l	(Illuminated)	has reached the maximum capacity (50 sets).
		The data in memory will be deleted automatically to store new
		data. For details, refer to "12. Data Memory".
		Memory type error
"C"l"r		Type of memory set in the function table and type of data
		stored are different. For details, refer to "12. Data Memory".
		Memory data error
		The stored data were destroyed. To use the memory
		function, erase all the old data and release the error. For
		details, refer to "12.1. Notes on Using Data Memory".

71