Agilent Technologies 22A, 24A To recall traces and setups, Recalling overwrites current settings

MegaZoom Concepts and Oscilloscope Operation

To recall traces and setups

To recall traces and setups

1Press the Save/Recall key to display the Save/Recall menu.

2 Press the Recall softkey to display the Recall menu.

3Press the Recall softkey and select the type of information to recall.

You can recall a waveform Trace, an oscilloscope Setup, or Trace and Setup. Be sure to recall both setup and trace if you want to measure the recalled trace with cursors.

4Select the file name to recall by turning the Entry knob while viewing the From: softkey.

INTERN_n are internal non-volatile oscilloscope memory files. All other files in the list are stored on the floppy disk.

Recalling overwrites current settings

Because recalling a setup will overwrite the oscilloscope’s current settings, you may want to save the existing setup first.

5Recall the selected file by pressing the Press to Recall softkey.

The recalled trace will be displayed in minimum intensity.

6 To clear the display of any recalled trace, press the Clear Display softkey.

4-52