Agilent Technologies 22A, 54621D, 24A, 42A, 54621A Agilent 54620-series Performance Characteristics

Performance Characteristics

Agilent 54620-series Performance Characteristics

*Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.

Vertical System: Analog Channels

Analog channels	54621A/21D, 54622A/22D: Ch1 and 2 simultaneous acquisition
	54624A: Ch 1, 2, 3, and 4 simultaneous acquisition
Bandwidth (-3dB)*	54621A/22D: dc to 60 MHz
	54622A/22D/24A: dc to 100 MHz
ac coupled	54621A/21D: 3.5 Hz to 60 MHz
	54622A/22D/24A: 3.5 Hz to 100 MHz
Calculated rise time	54621A/22D: ~5.8 ns
(= 0.35/bandwidth)	54622A/22D/24A: ~3.5 ns
Single Shot Bandwidth	50 MHz
Range1	1 mV/div to 5 V/div
Maximum Input	CAT I 300 Vrms, 400 Vpk
	CAT II 100 Vrms, 400 Vpk
	with 10074C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk
Offset Range	±5 V on ranges <10 mV/div
	±25 V on ranges 10 mV/div to 199 mV/div
	±100 V on ranges ≥ 200 mV/div
Dynamic Range	Lesser of ±8 div or ±32 V
Input Resistance	1 MΩ ±1%
Input Capacitance	~ 14 pF
Coupling	ac, dc, ground
BW Limit	~ 20 MHz selectable
Channel-to-Channel Isolation	dc to 20 MHz > 40 dB
(with channels at same V/div)	20 MHz to max bandwidth > 30 dB
Probes	10:1 10074C shipped standard for each analog channel
Probe ID (Agilent/HP &	Auto probe sense
Tek Compatible)

11 mV/div is a magnification of 2 mV/div setting. For vertical accuracy calculations, use full scale of 16 mV for 1 mV/div sensitivity setting.

7-4