Agilent Technologies 22A, 54621D, 24A, 42A, 54621A, 41A Range Ns/div to 50 s/div Resolution Vernier

Performance Characteristics

Agilent 54640-series Performance Characteristics

*Denotes Warranted Specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.

Horizontal

Range	1 ns/div to 50 s/div
Resolution	2.5 ps
Vernier	1-2-5 increments when off, 25 minor increments between major settings when on
Reference Positions	Left, Center, Right
Delay Range
Pre-trigger (negative delay)	Greater of 1 screen width or 1 ms
Post-trigger (positive delay)	500 seconds
Analog Delta-t Accuracy
Same Channel*	±0.005% reading ±0.2% screen width ±20 ps
	Example: for signal with pulse width of 10 us, scope set to 5 us/div (50 us screen width),
	delta-t accuracy = ±{.005%(10 us) + 0.2% (50 us) + 20 ps} = 100.52 ns
Channel-to-Channel	±0.005% reading ±0.2% screen width ±40 ps
Digital Delta-t Accuracy	(non-Vernier settings)
Same Channel	±0.005% reading ±0.2% screen width ±(1 digital sample period, 1 ns)
	Example: for signal with pulse width of 10 us, scope set to 5 us/div (50 us screen width),
	and single pod active (1 GSa/s), delta-t accuracy = ±{.005%(10 us) + 0.2% (50 us) + 1 ns}
	= 101.5 ns
Channel-to-Channel	±0.005% reading ±0.2% screen width ±(1 digital sample period) ±(chan-to-chan skew))
Delay Jitter	10 ppm
RMS Jitter	0.025% screen width + 30 ps
Modes	Main, Delayed, Roll, XY
XY
Bandwidth	Max bandwidth
Phase error @ 1 MHz	1.8 degrees

7-16