536 AMD Geode™ LX Processors Data Book
GeodeLink™ Control Processor
33234H
Figure 6-56. Processor Clock Generation6.13.4 Companion Device Interface
The AMD Geode companion device interface for I/O con-
nections (GIO) provides the system interface between the
AMD Geode CS5536 companion device and the
AMD Geode LX processor. The GIO supports companion
device modes for current and future companion device
needs. The major blocks (shown in Figure 6-57 on page
537) of the GIO are:
GIO_GLIU
GIO_SYNC
GIO_PCI
Features
CS5536 companion device support:
— Supports CPU Interface Serial (CIS) that mux'es
signals: INPUT_DISABLE, OUTPUT_DISABLE and
Legacy (LGCY) signals: A20M, INIT, SUSP, NMI,
INTR, SMI.
— System interface signals clocked on raw PCI input
clock.
No master capabilities.
6.13.4.1 GIO_GLIU
The GIO_GLIU interface module is responsible for all the
GLIU slave functionality. The GIO_GLIU slave implements
a large MSR space consisting of the required standard
GLIU device MSRs and the MSR controls for the I/O com-
panion modes and the Legacy signals. The GIO_GLIU
must properly decode all possible GLIU transaction types
including the unexpected addresses, request types and
sizes, and must return the proper number of responses. In
addition, it provides error logic to detect unexpected
addresses and types and implements the processor float-
ing point exception handling logic.
6.13.4.2 GIO_SYNC
The GIO synchronization module, GIO_SYNC, handles
synchronization of all signals that cross from the GLIU to
PCI domain or PCI to GLIU domain.
6.13.4.3 GIO_PCI
The GIO_PCI module drives the values of the system inter-
face signals. Table 6-83 on page 537 shows the source of
each output signal in each of the AMD Geode companion
device modes.
SYSPLL
DOTPLL
DOTREF
SYSREF
GLCP_DOTPLL[15]
GLCP_SYS_RSTPLL[12]
SDRAM Clocks
GL Clocks
DOTCLK
PCI
CPU Core
GLCP_SYS_RSTPLL[11]
Dividers