©2008 Advanced Micro Devices, Inc. Host PCI Bridge Registers (Device 20, Function 4)
AMD SB600 Register Reference Manual Proprietary Page 272
CLKCTRL- RW - 8 bits - [PCI_Reg: 42h]
Field Name Bits Default Description
PCICLKStopEnable 0 0b 33MHz PCICLKs request bit; when ‘1,’ 33 MHz PCI Clocks
are requested to stop.
PCICLKStopStatus 1 0b Read only.
33MHz PCICLKs stop status: ‘1’ stopped, ‘0’ running.
PCICLK0Enable 2 1b 33MHz PCICLK0 enable.
PCICLK1Enable 3 1b 33MHz PCICLK1 enable.
PCICLK2Enable 4 1b 33MHz PCICLK2 enable.
PCICLK3Enable 5 1b 33MHz PCICLK3 enable.
P2SControl 6 0b P_CLK domain to S_CLK domain synch-up disable.
S2PControl 7 0b S_CLK domain to P_CLK domain synch-up disable.
Clock control register
ARCTRL- RW - 8 bits - [PCI_Reg: 43h]
Field Name Bits Default Description
Reserved 6:0 ffh Reserved
ArbiterEnable 7 1b Arbiter enable. ‘0’ disabled to give PCIB the exclusive
ownership of the secondary bus.
Arbiter control register
SMLT_PERF- RW - 16 bits - [PCI_Reg: 44h]
Field Name Bits Default Description
SMLT_Perf 15:0 0000h Count the total number of a burst being broken into multiple
transactions due to MLT timeout.
Secondary MLT performance register
PCDMA- RW - 8 bits - [PCI_Reg: 48h]
Field Name Bits Default Description
PCDMA Device Enable
A
0 0b Device enable for request 3. Needs to be enabled when
there is a PCDMA device corresponding to request 3
PCDMA Device Enable
B
1 0b Device enable for request 4. Heeds to be enabled when
there is a PCDMA device corresponding to request 4
Fast Back to Back Retry
Enable
2 0b Retry Fast Back to Back transactions on Write buffer full.
Lock Operation Enable 3 1b W hen reg0x40[2]=1, this bit should be set to 1 for the proper
operation of the PCI LOCK# function.
Reserved 7:4 00h Reserved
PCDMA device Enable bits
Additional Priority- Bits RW - 8 bits - [PCI_Reg: 49h]
Field Name Bits Default Description
Reserved 0 0b
PCDMA Priority 1 0b If enabled includes PCDMA request into high priority list
Reserved 7:2 00h Reserved
Priority Bits
PMLT_PERF- RW - 16 bits - [PCI_Reg: 46h]
Field Name Bits Default Description
PMLT_Perf 15:0 0000h Count the total number of a burst being broken into multiple
transactions due to MLT timeout.
Primary MLT performance register