©2008 Advanced Micro Devices, Inc. OCHI USB 1.1 and EHCI USB 2.0 Controllers
AMD SB600 Register Reference Manual Proprietary Page 53
HcControl - 32 bits - [MEM_Reg : 04h]
Field Name Bits Default HCD HC Description
IE 3 0b RW R
IsochronousEnable
This bit is used by HCD to enable/disable processing
of isochronous Eds. While processing the periodic list
in a Frame, HC checks he status of this bit when it
finds an Isochronous ED (F=1). If set (enabled), HC
continues processing the Eds. If cleared (disabled),
HC halts processing of the periodic list (which now
contains only isochronous Eds) and begins
processing the Bulk/Control lists. Setting this bit is
guaranteed to take effect in the next Frame (not the
current Frame).
CLE 4 0b RW R
ControlListEnable
This bit is set to enable the processing of the Control
list in the next Frame. If cleared by HCD, processing
of the Control list does not occur after the next SOF.
HC must check this bit whenever it determines to
process the list. When disabled, HCD may modify the
list. If HcControlCurrentED is pointing to an ED to be
removed, HCD must advance the pointer by updating
HcControlCurrentED before re-enabling processing of
the list.
BLE 5 0b RW R
BulkListEnable
This bit is set to enable the processing of the Bulk list
in the next Frame. If cleared by HCD, processing of
the Bulk list does not occur after the next SOF. HC
checks this bit whenever it determines to process the
list. When disabled, HCD may modify the list. If
HcBulkCurrentED is pointing to an ED to be removed,
HCD must advance the pointer by updating
HcBulkCurrentED before re-enabling processing of
the list.
HCFS 7:6 00b RW RW
HostControllerFunctionalState for USB
00b: USBRESET
01b: USBRESUME
10b: USBOPERATIONAL
11b: USBSUSPEND
A transition to USBOPERATIONAL from another
state causes SOF generation to begin 1 ms
later. HCD may determine whether HC has
begun sending SOFs by reading the
StartofFrame field of HcInterruptStatus.
This field may be changed by HC only when in
the USBSUSPEND state. HC may move from the
USBSUSPEND state to the USBRESUME state after
detecting the resume signaling from a
downstream port.
HC enters USBSUSPEND after a software reset,
whereas it enters USBRESET after a hardware
reset. The latter also resets the Root Hub and
asserts subsequent reset signaling to
downstream ports.