
Deep Dive
Unlikely cause: speakers
Check | Result | Action | Code | |
|
|
|
|
|
1. | Power ON system. Verify if | Yes | The symptom is powering |
|
| there is any indication that the |
| up. Jump to Won’t Start Up |
|
| system has powered up (fan |
| symptom flow. |
|
| rotation, hard drive or optical |
|
|
|
|
|
|
| |
| drive noise, backlight turns on). | No | Go to step 2. |
|
|
|
|
|
|
2. | Disconnect AC power from | Yes | It is possible for the power |
|
| adapter for 1 minute, and |
| adapter to trip. After problem |
|
| reconnect. Does the system |
| is identified, determine if the |
|
| power on when power ON |
| adapter continues to trip. |
|
| button is pressed?. |
| Replace as needed. |
|
|
|
| Code may be a P01 (if adapter |
|
|
|
| is replaced) |
|
|
|
|
|
|
|
| No | Go to step 3 |
|
|
|
|
|
|
3. | Does the unit power on with | Yes | Bad power adapter, replace | P01 |
| known good power adapter? |
| and retest. |
|
|
|
|
|
|
|
| No | Go to step 4. |
|
|
|
|
|
|
4. | Remove drive internal frame | Yes | Go to Won’t Start Up | P16 |
| assembly SDRAM, and AirPort/ |
| symptom flow step 3 |
|
| Bluetooth card. Connect power |
|
|
|
| adapter. When the ON button is | No | Go to step 5. |
|
| pressed, does the LED light? |
| ||
|
|
|
| |
|
|
|
|
|
5. | Inspect power ON button for | Yes | Bad power switch, replace | X14 |
| damage, disconnect power ON |
| bottom housing. |
|
| cable from logic board, and |
|
|
|
|
|
|
| |
| short pins on connector. Does | No | Go to step 6 |
|
| the front LED power on? |
|
|
|
|
|
|
|
|
6. | Disconnect LED, remove logic | Yes | Bottom Housing causing an | X13 |
| board from bottom housing. |
| issue with board, examine for |
|
| Place the logic board on a |
| defects or replace. |
|
| clean |
|
|
|
| No | Replace logic board and | M01 | |
| Reconnect LED without | |||
| mounting in housing, Short |
| retest. |
|
| the power ON pins. Does the |
|
|
|
| LED light?. |
|
|
|
|
|
|
|
|
Mac mini (Late 2009) Symptom Charts — Startup and Power 19 |