Asante Technologies 8000 Enabling and Disabling Station Movement Trap, Similar to Figure

Advanced Management

similar to Figure 4-4.

Duplicated-IP List
+---------------	+	------------------	+-+-+		-------------------	+-+-+
IP Address		Owner MAC	MP		Spoofer MAC	MP
+---------------	+	------------------	+-+-+		-------------------	+-+-+
192.203.54.222		00:00:94:00:00:01	1	1	00:00:94:00:00:02	1	2
192.203.54.223		00:00:94:00:00:04	1	3	00:00:94:00:00:02	1	2
192.203.54.224		00:00:94:00:00:05	1	4	00:00:94:00:00:02	1	2

Press <q> to Quit, or, press any key to continue...

Figure 4-4 Duplicated IP address list

Enabling and Disabling Station Movement Trap

The station movement trap security measure ensures that when any end station is moved from one switch port to another, an alert is sent to the designated trap receiver. Station movement is detected when a station’s MAC address (already learned by the switch) appears on a different switch port. The station movement trap includes the station’s MAC address and IP address (if available) and the switch’s port numbers.

By default, station movement trap is disabled.

To enable or disable detection of the movement of a station on the IntraCore 8000:

1 From the Configuration Menu, type t to access the Secu- rity Management Menu.

2 Type s to toggle station movement trap.

Page 4-12