Asante Technologies 8000 user manual Port Configuration, Deleting a Trap Receiver

Port Configuration

Deleting a Trap Receiver

Use the following procedure to delete a trap receiver you have previously designated.

1 Open the SNMP Configuration Menu by typing n in the Configuration Menu.

2 Type d to Delete a Trap Receiver. A prompt for the entry of the trap receiver appears.

3 Enter the number of the entry you want to delete (1,2,3, or 4) and press Return.

The trap receiver is deleted from the SNMP Trap Receivers list.

Port Configuration

The Port Configuration Menu allows you to manually configure each of the IntraCore 8000’s ports for port speed, duplex, and auto-negotiation. It also provides an overview of the entire IntraCore 8000 system’s port operating status.

To access the Port Configuration Menu, type p in the Configuration Menu. A System Module Map screen similar to Figure 3-9 appears.

System Module Map

=================

Please select one of the following slots

Slot Description (Module Type)

------------------------------------------

124 10/100BaseTX ports Module (24-100TX)

22 1000BaseX ports Module (2-GBIC)

324 10/100BaseTX ports Module (24-100TX)

42 1000BaseX ports Module (2-GBIC)

5<none>

6<none>

7<none>

8<none>

9<none>

Enter Module Number (1-8)>

Figure 3-9 System Module Map screen

Choose the module for which you want to see a Port Configuration Menu. If, for example, you chose slot 1, you would see a screen similar to Figure 3-10.

Page 3-19