Asante Technologies 8000 user manual Changing System IP Information

Configuration

Current Settings

Table 3-4 describes each setting on the System IP Configuration Menu.

Setting	Description
System IP Address	The IP (Internet Protocol) address of the IntraCore 8000.
System Subnet Mask	The filter that determines how the IntraCore 8000 IP address is
	split into network and host portions.
System Default Router	The IP address of the default router for the IntraCore 8000.
	Table 3-4 System IP settings

Changing System IP Information

To change the IP address, subnet mask, or default router of the IntraCore 8000, use the following procedure.

1

2

3

4

5

Open the System IP Configuration Menu by typing i in the Configuration Menu.

Type the command letter of the option you want to change.

Type the new address at the prompt.

See Table 3-4 for a description of each address.

IImportant: Follow the format:

number.number.number.number

To cancel a change, press ctrl-c at the command prompt. Press Return.

The IP setting change for the IntraCore 8000 takes effect. Type q to quit and return to the Configuration Menu.

Page 3-10