Asante Technologies 8000 Configuring 1000BaseX Ports, Port Configuration Menu for 1000BaseX ports

Port Configuration

The duplex mode is changed immediately, and the change is reflected in the Link Speed/Duplex line near the top of the Port Configuration Menu.

Configuring 1000BaseX Ports

Because 1000BaseX ports are always in full duplex mode, the only configuration option for 1000BaseX ports is enabling and disabling the port.

To access the Port Configuration Menu for 1000BaseX ports, type p in the Configuration Menu. The System Module Map appears, as shown in Figure 3-9. Enter the number of a module with 1000BaseX ports (such as module 2 in the map shown in Figure 3-9). The Port Configuration Menu for 1000BaseX ports appears, as shown in Figure 3-12.

IntraCore 8000 Basic Port Configuration Menu		Module Type: (2-GBIC)
Module: [1]	Port: [1]
	Port 1	Port 2
	===========	===========
Operating Status:	SX-LinkUp (Forwarding)	SX-LinkDown

Port Status: Enabled		Link Status: Up [1000Mbps-Full]
<Cmd>	<Description>
h	Help for legends

tToggle Port Status Enable/Disable

a Advanced Port Configuration

g Global Port Configuration

q Return to Previous Menu

Command>

Select module Next module Prev module Select port Next port Prev port

Figure 3-12 Port Configuration Menu for 1000BaseX ports

For a description of the current settings shown in the top portion of the screen, see “Current Port Settings” on page 3-22.

Page 3-25