Asante Technologies 8000 Current Settings, Date Rently running on the IntraCore Load Mode

Configuration

Current Settings

Table 3-5 explains each setting on the Remote Bootstrap Configuration Menu.

Setting	Description
Running Image Version/	The version and compilation date of runtime code that is cur-
Date	rently running on the IntraCore 8000.
Load Mode	The current method for loading software for the IntraCore 8000.
	Remote — Loads the image file from a server on the network.
	Local — Executes the software image file from the IntraCore
	8000’s internal flash memory (default setting; the IntraCore
	8000 automatically reverts to this setting after downloading a
	new software file).
Boot Mode	The method for requesting the image file from the network.
	This option is available only if you have selected Remote Load
	Mode.
	BootP-TFTP — Sets the IntraCore 8000 to request an IP
	address from a BootP server AND to download the software’s
	image file through TFTP (Trivial File Transfer Protocol).
	I Important: To use this option, the IntraCore
	8000 IP address must be set to 0.0.0.0.
	TFTP ONLY — Sets the IntraCore 8000 to only download the
	software image file through TFTP.
	I Important: To use this option, the switch must
	already have an assigned IP address and the Load
	Mode must be set to Remote.
Boot Server IP	The Internet Protocol (IP) address of the TFTP server providing
	the TFTP capabilities on your network. Not Available if Boot
	Mode is BootP-TFTP.
Boot File Name	The name of the file you are going to request for download. Not
	available if boot mode is BootP/TFTP.
Retry Count	Number of attempts the IntraCore 8000 makes to download the
	image file if errors occur. The default is 5.
Boot Bank	Number of the destination bank for the image file you are
	downloading (1 or 2).
	Table 3-5 Bootstrap Settings

Page 3-14