Viewing the System Log
Scheduling a System Reset
You can schedule the IntraCore 8000 to automatically perform a reset from one second up to 24 hours (86,400 seconds) in advance.
To schedule a reset, use the following procedure.
1
2
3 Enter the number of seconds the IntraCore 8000 will wait before it automatically resets.
IImportant: The maximum number of seconds that can be entered is 86,400 (24 hours).
4 Press Return.
The IntraCore 8000 will reset automatically after the number of seconds you specified.
Viewing the System Log
The IntraCore 8000 system log records and displays any major system events on the switch, such as fatal errors, plugging in or removing a module, etc.
To view the system log, use the following procedure.
1 Type l in the Configuration Menu. The System Log Menu appears, as shown in Figure
Page
