Asante Technologies 8000 user manual Current Settings, Setting the Port Vlan ID

Advanced Management

Current Settings

Table 4-8 describes each setting on the GVRP Port Configuration Menu screen.

Setting	Description
Module	The IntraCore 8000 module for which the information on the
	screen applies.
Port	The port for which the information on the screen applies.
Port VLAN Member-	Shows each VLAN index’s current membership status for this
ship Info	port.
Port VLAN ID (PVID)	This port’s VLAN ID.
Port Frame Type	Whether the port currently receives all frames (tagged and
	untagged) or only 802.1Q tagged frames.
Gvrp Failed Reg. Count	The mumber of times the system has failed to dynamically reg-
	ister a VLAN. Failure usually indicates the maximum number
	of VLANS has been reached.
Port GVRP Status	Whether GVRP is currently enabled or disabled on this port.
Port Ingress Filtering	Whether ingress filtering is currently enabled or disabled on
	this port.
Gvrp Last Pdu Origin	The MAC address of the last Gvrp Pdu that was received.

Table 4-8 VLAN Port Configuration Settings

Setting the Port VLAN ID

Port VLAN ID (PVID) is used for VLAN classification of incoming untagged frames and has meaning only when a port is configured to receive both untagged and tagged frames. It is used to assign untagged frames to the VLAN identified by the PVID.

By default, each port on the switch has a PVID of 1 (the default VLAN). The allowed PVID range is 1 to 4094. For ports that are configured to receive only tagged frames, the PVID is meaningless and the port is assigned a PVID of 4095.

Page 4-34