Configuration
SNMP Configuration
The SNMP Configuration Menu allows you to configure the unit’s read and write community strings, and to enable or disable authentication traps. This menu also allows you to specify which of your network management stations will receive traps from the IntraCore 8000.
The s option in the Configuration Menu displays the SNMP (Simple Network Management Protocol) Configuration Menu, as shown in Figure 3- 8.
For further details on using SNMP and RMON for remote management of your network, see Chapter 4, “Advanced Management.”
IImportant: Be sure to change the SNMP community strings in order to prevent unauthorized access to man- agement information.
IntraCore 8000 SNMP Configuration Menu
SNMP Read Community: | public | |
SNMP Write Community: | private | |
Authentication Trap: | Enabled | |
SNMP Trap Receivers: |
| |
| IP Address | Community |
1. | 192.168.54.150 | private |
2. | 192.168.54.110 | Sarah |
3. | <EMPTY> | <EMPTY> |
4. | <EMPTY> | <EMPTY> |
<Cmd> <Description>
rSet SNMP Read Community
w Set SNMP Write Communtiy
t Toggle Trap Authentication Enable/Disable
a Add/Update SNMP Trap Receiver
d Delete SNMP Trap Receiver
q Return to Previous Menu
Command>
Figure 3-8 SNMP Configuration Menu
Page
