Type t to choose Toggle Port Security Trap.
Select u to Set/Clear port security. Type s to set security.

Security Management

1 From the Configuration Menu, type t to access the Secu- rity Management Menu.

2 Type p to access the Port Security Configuration Menu, as shown in Figure 4-5.

3

4

5 Type the numbers of the ports for which you want to set the security. You can specify a single port, a series of port numbers separated by commas, a range of ports shown with a hyphen, or a combination of ranges and single ports. For example, you can type 1-8, 14 to specify ports one through eight, and port fourteen. See help for more information.

6 Type 1 for Port Security Level 1. To enable New Node detection:

1 From the Configuration Menu, type t to access the Secu- rity Management Menu.

2 Type p to access the Port Security Configuration Menu, as shown in Figure 4-5.

3

4 Type 1 to toggle the new node trap (if it is not already enabled).

Configuring Port Lock and Intruder Lock

The port intruder security measure allows you to create a port-trusted MAC address which is allowed to direct traffic to the port. Attempts to send traffic to the port from other stations are regarded as security intrusions, and can be disallowed. The security measure may be enabled as a port lock (security level 2) or an intruder lock (security level 3).

Page 4-15

Page 105
Image 105
Asante Technologies 8000 user manual Configuring Port Lock and Intruder Lock