Advanced Port Configuration
Advanced Port Configuration
The Advanced Port Configuration Menu allows you to control the port broadcast and multicast rate, to enable or disable 802.3x flow control, and to set the default priority of the port.
To access the Advanced Port Configuration Menu, from the Configuration Menu, type p to access the System Module Map, then select the module you want to configure. From the Port Configuration Menu, type a. The Advanced Port Configuration Menu appears for either 10/100BaseTX or 1000BaseX, as shown in Figure
Advanced 10/100BaseTX Port Configuration
IntraCore 8000 Advanced Port Config Menu | Module Type: | ||||||
Module: [1] |
|
| Port: | [1] |
|
| |
|
| 1 | 8 | 9 | 16 | 17 | 24 |
|
| ======== | ======== | ======== | |||
Operating Status: | |||||||
Flow Ctrl: |
| ||||||
Priority: |
| 10001111 | 11111122 | 23333333 | |||
Max. Broadcast Rate: |
| N/A |
|
|
|
| |
Max. Multicast Rate: |
| N/A |
|
|
|
| |
802.3x Flow Control: |
| Enabled |
|
|
| ||
Port Default Priority: |
| 1 |
|
|
|
| |
<Cmd> | <Description> |
|
|
|
|
|
|
h | Help for legends |
|
|
|
| ||
r | Set Max. Broadcast/Multicast Rate |
| |||||
f | Toggle 802.3x Flow Control Enable/Disable | ||||||
i | Set Port Default Priority |
|
|
| |||
q | Return to Previous Menu |
|
|
| |||
Command> |
|
|
|
|
|
|
|
Select module Next module | Prev module | Select port | Next port Prev port | ||||
|
|
|
|
|
|
|
|
Figure 3-13 Advanced Port Configuration Menu - 10/100BaseTX port
For a legend of the symbols used for the flow control and port priority table, type h and you will see the screen displayed in Figure
Page