Asante Technologies 8000 user manual Configuration

Figure 3-30 Port Statistics Counters since system up

3 Use the s command to select a port for which you want to see the counters, or use n and p to find the port.

4 Use the g command to select a different module (group) in which you want to select a port, or use x and v to find the module.

5 Type t to stop the periodic updating of the counters, so you can record what they are at that time.

6 Type r to see a display of the same counters, but accrued since the last reset of the counters, as shown in Figure 3- 31.

Configuration

IntraCore 8000 Port Statistics Counters				Module: 2		Port: 1
Elapsed Time Since Up:		000:00:00:55
<Counter Name>	<Total>	<Avg./s>	<Counter Name>		<Total>	<Avg./s>
Total RX Pkts	1474	26	Total RX Bytes		116246	2113
Dropped Pkts	185	3	Good Broadcast		57	1
Good Multicast	6	0	Undersize Pkts		0	0
Oversize Pkts	0	0	CRC/Align Errors		0	0
Fragments	0	0	FCS Errors		0	0
Collisions	0	0	Late Events		0	0
64-Byte Pkts	283	5	65-127 Pkts		1174	21
128-255 Pkts	12	0	256-511 Pkts		5	0
512-1023 Pkts	0	0	1024-1518 Pkts		0	0

<Cmd>	<Description>	<Cmd>	<Description>		<Cmd>	<Description>
r	since reset	x	next	module	n	next	port
t	stop refresh	v	prev	module	p	prev	port
q	quit	g	select module		s	select port

Command>

Page 3-54