Advanced Management
How It Works
All bridges on the network communicate with each other using special packets called Bridge Protocol Data Units (BPDUs). The information exchanged in the BPDUs enables bridges on the network to:
GElect a single bridge to be the root bridge.
GCalculate the shortest path from each bridge to the root.
GSelect a designated bridge on each segment, which lies closest to the root and forwards traffic to the root.
GSelect a port on each bridge to forward traffic to the root.
GSelect the ports on each bridge that forward traffic, and place the redundant ports in blocking state.
Enabling and Disabling STP
The IntraCore 8000 is shipped with spanning tree enabled on all ports by default. To enable or disable STP on your IntraCore 8000, use the following procedure.
1
2
3
4
Type c to open the Configuration Menu.
Open the Spanning Tree Configuration Menu by typing s in the Configuration Menu. See Figure
Type t to toggle STP to enabled or disabled.
If you select disabled, you are prompted to confirm the change.
The STP status is changed. The status is displayed near the top of the Spanning Tree Configuration Menu.
Page