Asante Technologies 8000 Displaying a Vlan FID-VID Association Summary, Configuring Gvrp

VLAN Management

To view the summary for other modules, type a command as shown at the bottom of the screen.

Displaying a VLAN FID-VID Association Summary

To view a summary of the FIDs and their associated VIDs, type v in the Configuration Menu to access the VLAN Management Menu, then type f to access the VLAN FID-VID Association summary. A screen similar to Figure 4-13 appears.

IntraCore 8000 FID Summary
+-----	+-------------------------------------------------------------		+
FID		VIDs
+-----	+-------------------------------------------------------------		+
00	001
+-----	+-------------------------------------------------------------		+
01	1024
+-----	+-------------------------------------------------------------		+

Figure 4-13 VLAN FID-VID association summary

Resetting VLAN Configuration to Defaults

To reset the security measures on the IntraCore 8000 to the factory defaults, access the VLAN Management Menu by typing v in the Configuration Menu. Then type r to reset all of the VLAN configurations that have been changed back to the factory-set defaults.

Configuring GVRP

GARP VLAN Registration Protocol (GVRP) allows an above-end station to to be registered as wanting to join a specific VLAN. This creates a dynamic VLAN topology that responds to VLAN traffic; until it sees activity from the specific VLAN, the registered station doesn’t appear to be part of that VLAN.

VIDs 1, 2, 3 VIDs 1, 3 VIDs 2, 3

A

B

C

Figure 4-14 A three-switch network with VLANs 1, 2, and 3

Page 4-39