Chapter 7
Table 7-11. USP Dialog Box - Frame Relay Parameters (Continued)
Field | Description |
|
|
Oper Status | The operational status of the interface. |
| Possible statuses include: |
| • Up - The interface is up and can transmit |
| and receive packets. |
| • Down - The interface is down due to |
| some failure, and cannot transmit or |
| receive packets. |
| • Testing - The interface is in testing mode |
| and cannot transmit or receive regular |
| data. |
| • Standby - The interface is a backup |
| interface and cannot transmit or receive |
| packets unless the primary interface it |
| backs up fails. |
| • Disabled - The interface is disabled. It |
| cannot transmit or receive packets. |
| • Partially Down - The interface is up. |
| However, some interfaces (or PVCs) |
| layered on top of this interface are Down. |
| Some packets can be transmitted and |
| received. |
|
|
MTU (octets) | The size (in octets) of the largest datagram |
| that can be sent via the interface. |
|
|
Last Fault Message | The type of error last occurring on the |
| interface. Possible values are: |
| • Unknown Error |
| • Receive Short |
| • Receive Long |
| • Illegal Address |
| • Unknown Address |
| • DLCMI Protocol Error |
| • DLCMI Unknown IE |
| • DLCMI Sequence Error |
| • DLCMI Unknown Rpt |
| • No Error Since Reset |
|
|
Time Since Fault | The amount of time the system was up before |
| the last error occurred. |
|
|
116 | Avaya C360 Manager User Guide |
