Avaya C360 manual Operational state of the Auto-Negotiation

Device Configuration

Table 3-7. Port Configuration Fields - General Tab (Continued)

Field	Description
Auto Negotiation	The operational state of the Auto-Negotiation
Status	protocol between two stations. Possible
	statuses are:
	• Pass - The Auto-Negotiation protocol is
	enabled and a common protocol has
	been established.
	• In progress - The Auto-Negotiation
	protocol is in the process of detecting the
	communication capabilities of the
	endstations and setting them to the
	highest common denominator.
	• Fail - The Auto-Negotiation protocol
	was not able to detect the
	communication capabilities of the end
	station, or was unable to set them to the
	highest common denominator.
	• Disabled - The Auto-Negotiation
	protocol is disabled.
Duplex Mode	The state of communication of the selected
	port. Possible values are:
	• Full Duplex - The port can send and
	receive simultaneously.
	• Half Duplex - The port can either
	receive or send, but can not do both
	simultaneously.
Speed Mode	The speed of communication of the selected
	port. Possible values are:
	• Ethernet - 10 Mbps.
	• Fast Ethernet - 100 Mbps.
	• Gigabit Ethernet - 1000 Mbps.
Flow Control Mode	The state of flow control on the selected port.
Operational Status	The warning level of the selected port.
	Possible values are:
	• OK
	• Warning
	• Fatal
Fault Messages	A list of fault messages.

Avaya C360 Manager User Guide 43