Avaya C360 manual IP Multicast Filtering Parameters, Field Description

IP Multicast Filtering

The following table provides a list of the fields in the IP Multicast Filtering dialog box and their descriptions:

Table 13-1. IP Multicast Filtering Parameters

Field	Description
Filtering Mode	The mode of operation of the IP Multicast
	Filtering on the device. Possible Modes are:
	• Enable - IP Multicast Filtering is enabled
	on the device.
	• Disable - IP Multicast Filtering in not
	enabled on the device.
Host Aging Time	The amount of time (in seconds) allowed to
	pass from a router’s last IP Multicast request
	before the device stops forwarding all multicast
	sessions to a router. The valid range for this
	parameter is 30 - 7200 seconds.
Router Aging Time	The amount of time (in seconds) allowed to
	pass from a remote router’s last IP Multicast
	request before the local router’s multicast
	routing table stops forwarding all multicast
	sessions to the remote router. The valid range
	for this parameter is 30 - 7200 seconds.
Delay Time	The amount of time (in seconds) the device
	waits from receiving a request for a new IP
	Multicast session until IP Multicast filtering
	begins. This time allows other hosts to report to
	the device. The valid range for this parameter is
	1 - 300 seconds.

To change the IP Multicast filtering configuration for the Avaya C360 Device, change the IP Multicast filtering parameters.

To apply the changes, click Apply.

To refresh the information in the IP Multicast Filtering dialog box, click Refresh.

Avaya C360 Manager User Guide 181