WAN Configuration
Table 7-1. E1/T1 Port Configuration Parameters (Continued)
Field | Description |
|
|
Linecode | The type of linecode. Possible values are: |
| For an E1 line: |
| • HDB3 |
| • AMI |
| For a T1 line: |
| • B8ZS |
| • AMI |
|
|
Cablelength (T1 | The recommended maximum cable length. |
only) |
|
|
|
Gain (T1 only) | The gain on this interface. |
|
|
Clock Source | The source of the Transmit Clock. Possible |
| sources include: |
| • Line - The recovered receive clock is used |
| as the transmit clock. |
| • Internal - The local clock is used as the |
| transmit clock. |
|
|
FDL (T1 only) | The type of FDL used on this interface. Possible |
| types include: |
| • ANSI |
| • AT&T |
| • Both - ANSI and AT&T FDl are both used |
| on this interface. |
|
|
Local Loopback | A request to use a local loopback. A local |
| loopback can be performed using: |
| • No Loopback |
| • Payload Loopback |
| • Line Loopback |
| • Diag Loopback |
|
|
Remote Loopback | A request to use a remote loopback. A remote |
(T1 only) | loopback can be performed using: |
| • No Remote Loopback |
| • Remote Line |
| • Remote Payload |
|
|
Avaya C360 Manager User Guide | 83 |
