WAN Configuration
The following table lists the configuration fields in the Serial Port tab of the USP Configuration dialog box and their descriptions:
Table 7-8. USP Dialog Box - Serial Tab Parameters
Field | Description |
|
|
Description | The USP port description. |
|
|
Port Type | The type of port - Universal Serial Port. |
|
|
Port Functionality | The functionality of the port. Possible values |
| include: |
| • V.35 DTE |
| • X.21 DTE |
| • EIA530A DTE |
|
|
Encapsulation | The encapsulation method for channel groups |
| on the port. Possible methods include: |
| • PPP |
| • Frame Relay |
|
|
Idle Characters | The bit pattern used to signify an idle line. |
| Possible patterns include: |
| • Flags |
| • Mark |
|
|
Bandwidth | The configured bandwidth of the port in bits per |
| second. |
|
|
Administrative Status | The state of the selected port. Possible values |
| are: |
| • Enable - The port is enabled and can |
| transmit and receive packets. |
| • Disable - The port is disabled and cannot |
| transmit or receive packets. |
|
|
VoIP Queue | The state of VoIP queuing on the PPP session. |
| VoIP queuing changes the length of the high |
| priority queue providing support for the |
| configuration of a maximum VoIP delay. |
| Possible states include: |
| • On - Voip queuing is active on the PPP |
| session. This enables the device’s queues to |
| optimally service VoIP applications. |
| • Off - Voip queuing is not active on the PPP |
| session. |
|
|
Avaya C360 Manager User Guide | 107 |
