Avaya C360 manual Fast Ethernet 100 Mbps, Gigabit Ethernet 1000 Mbps, No Flow Control, 802.3x Sym

Chapter 3

Table 3-5. LAG Configuration Fields - General Tab (Continued)

Field	Description
Auto Negotiation	The configured state of the Auto-Negotiation
Mode	protocol between two stations. When enabled,
	Auto-Negotiation detects the highest common
	denominator for communication between
	endstations, and sets both to the same highest
	common setting. It also delivers remote link
	status.
	For LAGs with 10BaseT and 100BaseT ports,
	Auto-Negotiation determines the speed and
	Duplex Mode of communication between the
	endstations. For LAGs with Gigabit ports,
	Auto-Negotiation determines the Flow
	Control setting of the ports.
	Possible values are:
	• Enable - Auto-Negotiation is enabled for
	this LAG.
	• Disable - Auto-Neotiation is not enabled
	for this LAG.
	For more information, refer to Auto-Negotiation
	in The Reference Guide.
Duplex Mode	The state of communication of the selected
	LAG. Possible values are:
	• Full Duplex - The LAG can send and
	receive simultaneously.
	• Half Duplex - The LAG can either
	receive or send, but can not do both
	simultaneously.
Speed Mode	The speed of communication of the ports on
	the selected LAG. Possible values are:
	• Ethernet - 10 Mbps.
	• Fast Ethernet - 100 Mbps.
	• Gigabit Ethernet - 1000 Mbps.
Flow Control Mode	The state of flow control on the selected LAG.
	Possible values are:
	• No Flow Control
	• 802.3x Sym

34 Avaya C360 Manager User Guide