Chapter 20

The following parameters are displayed:

Table 20-3. Routing Table Parameters

 

 

Field

Description

 

 

Destination

The destination network IP address of this

 

route. An IP address of 0.0.0.0 denotes a default

 

router.

 

 

Netmask

The destination network mask of this route.

 

 

Next Hop

The address of the next router of this route, via

 

which the destination of this route is reached.

 

 

VLAN Name

The logical name of the local interface through

(not for X330WAN)

which the next hop of this route is reached.

 

 

L2 Interface Name

The logical name of the local interface through

(X330WAN router

which the next hop of this route is reached.

only)

 

 

 

Protocol

The protocol through which the route was

 

learned. The following protocols can be

 

specified:

 

Static - The route was manually configured

 

to this device.

 

Local - The route represents a directly

 

attached

 

net/subnet and corresponds to one of the

 

IP interfaces configured to this device.

 

RIP - The entry was learned from the RIP

 

protocol.

 

OSPF - The entry was learned from the

 

OSPF protocol.

 

 

Leak Route

If checked, static entries are advertised by RIP

 

and OSPF. If unchecked, static entries are not

 

advertised.

 

 

Cost

Number of hops to the destination network, or

 

the cost of the route for OSPF routes.

 

 

Permanent

The permanence status of the route. Possible

(X330WAN router

statuses are:

only)

Checked - The route is not disabled when

 

 

a link on the route is down.

 

Unchecked - The route is disabled when a

 

link on the route is down.

 

 

226

Avaya C360 Manager User Guide

Page 240
Image 240
Avaya C360 manual Routing Table Parameters