Avaya C360 Manager User Guide 73
VoIP Engine Configuration
QoS
QoS can be controlled either locally or remotely. If control is local, it is
possible to configure QoS, RTCP, and RSVP parameters. If control is
remote, QoS parameters are determined by the MGC.
The following table lists the QoS fields and their descriptions.
RTP port Max The maximum range of UDP ports assigned by
the call controller for RTP traffic. The value
ranges between 3 - 65535.
Table 6-2. VoIP resources - QoS Parameters
Field Description
QoS Control The source of QoS control. This parameter can
only be changed via the CLI. Possible values are:
• Local - The processor uses the local QoS
parameters. If the processor is using the
local QoS parameters, the 802 Priority, EF
DSCP, and BBE DSCP fields can be
configured.
• Remote - The processor receives its QoS
parameters from the Media Gateway
Controller. All QoS parameters are Read-
only.
802 Priority Priority based on a CoS standard which assigns
rights and privileges to users of a telephony
network. Possible values are 0 - 7.
EF DSCP A type of differentiated service used to provide
guaranteed bandwidth across a network.
If sufficient bandwidth is available, the
Expedited Forwarding class can be used.
The values range are 0 - 63.
BBE DSCP A DiffServ class which is used per call to achieve
the greatest possible bandwidth. The values
range between 0 - 63.
Table 6-1. VoIP resources - General Parameters (Continued)
Field Description