Trap Managers Configuration
Viewing the WAN Trap Managers Table
To view the Trap Managers table for an X330WAN expansion module:
1.Select the X330WAN expansion module for which you want to view the Trap Managers table.
*Note: Each X330WAN expansion module has its own Trap Managers table, which can be used to configure IP addresses and trap managers for the specific module. Device wide trap settings do not apply to traps from X330WAN expansion modules in the device.
2.Click 
.
Or
Select Configure > Trap Managers. The WAN Trap Managers table opens.
Figure 14-4. WAN Trap Managers Table
The WAN Trap Managers table is used to configure the IP addresses of the trap managers and their trap reporting statuses for WAN traps. Traps include routing, WAN, and frame relay traps.
Frame relay traps can only be enabled or disabled per X330WAN expansion module. If frame relay traps are enabled, all enabled managers receive frame relay traps. If frame relay traps are disabled, no managers will receive frame relay traps.
Avaya C360 Manager User Guide | 191 |
