Chapter 2
Get/Set Toolbar
The Get/Set Toolbar provides buttons for getting and setting configuration parameters for selected ports and LAGs. When a port or LAG is selected, its configuration is reflected on the Get/Set Toolbar. Each group of buttons represents the various possible states of a configuration parameter. For example, the first group of buttons represents the possible speed of a port - 10 Mbps, 100 Mbps, or 1000 Mbps. If the center button is depressed, the port is currently configured to operate at 100 Mbps.
Selected ports and LAGs can be configured using the Get/Set Toolbar. To change the configuration of a port or LAG, click the button which represents the value of the parameter you want to apply to the port or LAG. Click apply to update the device with the changes. Click cancel to discard the changes. Options not applicable to the selected port or LAG are dimmed.
To configure the ports of a LAG, select the LAG icon in the Tree View or the Chassis View. Ports belonging to a LAG may not be configured by selecting the port.
Multiple ports and LAGs can be simultaneously configured using the Get/Set Toolbar. When multiple ports or LAGs with
The table below displays the buttons on the Get/Set Toolbar and explains their functions and settings.
|
| Table |
|
|
|
|
|
| Button | Description |
|
|
|
|
|
|
| Get and set the port/LAG’s speed: 10 Mbps, 100 |
|
|
| Mbps, 1000 Mbps. |
|
|
|
|
|
|
| Get and set the port/LAG’s status: Enabled, Disabled. |
|
|
|
|
|
|
| Get and set the port/LAG’s mode: Half duplex, Full |
|
|
| duplex. |
|
|
|
|
|
|
| Get and set the port/LAG’s |
|
|
|
| |
|
| Disabled. |
|
|
|
|
|
|
| Get and set the port/LAG’s STP mode: Enabled, |
|
|
| Disabled. |
|
|
|
|
|
|
|
|
|
10 | Avaya C360 Manager User Guide |
