Avaya C360 MGP Config

Chapter 5
62 Avaya C360 Manager User Guide
MGP Config The MGP Config tab provides hardware information about the Media
Gateway Processor. In addition, the MGP Config tab is used to configure
IP, VLAN, and QoS parameters.
Figure 5-2. MGP Config Tab
General
The upper section of the MGP Config tab provides general information
about a specific Media Gateway Processor.
The following table lists the General fields and their description.
Table 5-2. MGP Config Tab - General Parameters
Field Description
MG Identifier The ID of the MG that helps link the C360
module’s port identification with the G700
Media Gateway’s port identification.
MAC address The MAC address of the media gateway
processor.
FW version The firmware version of the media gateway
processor.