Channel Group Frame Relay Information, Open | Avaya C360 guide

Chapter 7

Table 7-3. Channel Group Dialog Box - PPP Parameters (Continued)

Field	Description

Operational Status	The operational status of the PPP interface.
	Possible statuses include:
	• Up - The interface is up and can transmit
	and receive packets.
	• Down - The interface is down due to
	some failure, and cannot transmit or
	receive packets.
	• Testing - The interface is in testing mode
	and cannot transmit or receive regular
	data.
	• Standby - The interface is a backup
	interface and cannot transmit or receive
	packets unless the primary interface it
	backs up fails.
	• Disabled - The interface is disabled. It
	cannot transmit or receive packets.
	• Partially Down - The interface is up.
	However, some interfaces (or PVCs)
	layered on top of this interface are Down.
	Some packets can be transmitted and
	received.

IPCP Status	IP Control Protocol. The state of IPCP for this
	PPP session. IP packets can only be
	transmitted and received over the PPP session
	when the IPCP status is Open. Possible
	statuses include:
	• Open
	• Not-Opened

Channel Group - Frame Relay Information

The Channel Group dialog box for Channel Groups using frame relay contains five tabs:

•Channel Group - Basic information about the Channel Group. For information on the fields in the Channel Group tab of the Channel Group - Frame Relay dialog box, refer to “Channel Group” on page 85.

90	Avaya C360 Manager User Guide

Image 104

Avaya C360 manual Channel Group Frame Relay Information, Not-Opened

Contents

14-300164 Issue June Avaya Integrated Management Copyright 2005, Avaya Inc All Rights Reserved SOC Installation and Repairs Table of Contents VoIP Engine Configuration Port Rmon Port Mirroring Device Index Organization of This Guide Purpose of This GuideWho Should Use This Guide Preface Xiii Xiv Introduction Avaya C360 Manager Overview Starting the Avaya C360 Manager Avaya C360 Manager as Part of Avaya Integrated Management Network Password Dialog Box Avaya C360 Manager via Web Management User Interface Application Tabs Table Symbols Managing TablesStatus Line Communication Statuses Chapter Device Manager Button Description Menu Item Application ToolbarApplication Toolbar Displays addresses of devices Button Description Get/Set ToolbarGet/Set Toolbar Tree View Desktop Chassis View Avaya C360 Chassis View Chassis View Port/LAG Colors Color MeaningGbic Port Status Gbic Port Status Selecting Elements Avaya C360 Device Manager Modes Dialog Area Using Dialog Boxes and Tables Refreshing Device InformationDialog Box Icons Icon Function Opening the Help to a Topic of Interest Using Avaya C360 Device Manager HelpOpening the Help to the Contents Chapter Device Configuration Viewing Device Information Device Information General Tab Field Description Device Information Advanced TabDevice Information Fields General Tab Device Information Dialog Box Advanced Tab Device Information Fields Advanced Tab Common Spanning Tree 802.1d STP Bridge Max Age Viewing Module Configuration IEEE-802.1x Mode Module Configuration General Tab Module Configuration Fields General TabPosition in which the module is located There can be up to 10 modules in a device MM710 MM711MM712 MM714 Route Mode Fatal Module Configuration Advanced Tab Module Configuration Dialog Box Advanced Tab Module Configuration Fields Advanced Tab Bups Status Lldp Viewing LAG Configuration LAG Configuration General Tab LAG Configuration Fields General Tab Possible values are User Priority 0 .. User Priority Fast Ethernet 100 Mbps Gigabit Ethernet 1000 MbpsNo Flow Control 802.3x Sym LAG Configuration Advanced Tab LAG Configuration Dialog Box Advanced Tab LAG Configuration Fields Advanced Tab LAG STP State Administrative point-to-point status Viewing Port Configuration Port Configuration General Tab Port Configuration Dialog Box General Tab Port Configuration Fields General Tab Priority level of packets exiting the port or Operational state of the Auto-Negotiation Port Configuration Advanced Tab Port Configuration Dialog Box Advanced Tab Port Configuration Fields Advanced Tab Port STP State STP Priority Classification of a specific port. Port Port Configuration Lldp Tab Port Configuration Dialog Box Lldp Tab Port Configuration Fields Lldp Tab Resetting the Device Chapter Power over Ethernet PoE Overview Viewing PoE Port Information Viewing PoE ConfigurationViewing PoE Information Module Configuration Power Tab Module Configuration Power Fields Port Configuration Power Tab Port Configuration Power Fields Low CriticalHigh Chapter G700 Media Gateway G700 Media Gateway Overview G700 Configuration Viewing Module Configuration MG Config Parameters MGP Config Tab General Parameters General IP Address Settings MGP Config IP Address Settings ParametersVlan Settings MGP Config Vlan Settings Parameters MGP Config QoS Parameters QoS Parameters MGC Lists MGC IP SettingsMGC Config MGC IP Settings Parameters Chapter Viewing Media Module Configuration Media Module Configuration Dialog Box Avaya Site Administration Media Module Configuration Parameters G700 Media Gateway Chapter VoIP Overview VoIP Engine ConfigurationConfiguring the VoIP Engine VoIP Resources VoIP resources General Parameters Maximum range of UDP ports assigned by Call controller for RTP traffic. The valueRanges between 3 QoS Rtcp Monitoring VoIP resources Rtcp monitoring Parameters Rsvp VoIP resources Rsvp Parameters VoIP Config VoIP config Parameters VoIP Status VoIP status Parameters Chapter WAN Configuration X330WAN Overview Avaya X330WAN Expansion Module Configuration Expansion Module Dialog Box E1/T1 Port Configuration E1/T1 Port Configuration Dialog Box E1/T1 Port Configuration Parameters CRC4No-CRC4 Unframed HDB3 B8ZSAT&T No Loopback Viewing Channel Group Information Channel Group PPP Session Information Channel Group Dialog Box Channel Group Parameters Ds0 bundle Channel Group Dialog Box Frame RelayFlags Mark Advanced PPP Channel Group Dialog Box PPP Tab Channel Group Dialog Box PPP Parameters Not-Opened Channel Group Frame Relay InformationOpen Channel Group Dialog Box Frame Relay Tab Disable EnableQ933a Lmi-rev1 Channel Group Dialog Box Frame Relay Parameters Channel Group Dialog Box Sub-Interfaces Tab Name of the interface DLCIs Channel Group Dialog Box Sub-Interfaces Parameters Channel Group Dialog Box DLCIs Tab Channel Group Dialog Box DLCIs Parameters PrimaryMedium Normal Managing Channel Groups Viewing the Channel Groups Table Channel Groups Table Parameters FrameRelay Creating, Editing, and Deleting Channel Groups Channel Group Wizard Welcome Screen Select E1/T1 Port Screen Select Channels Speed Screen USP Configuration 14. Channel Group Wizard Confirmation Screen USP PPP Interface 15. USP Dialog Box Serial Port Tab USP Dialog Box Serial Tab Parameters Type of port Universal Serial Port35 DTE 21 DTE Operational status of the interface. Possible USP Configuration Advanced Parameters Invert Tx Clock Ignore DCD Off 17. USP Configuration Dialog Box PPP Tab 10. USP Configuration PPP Parameters USP Frame Relay Interface 18. USP Dialog Box Frame Relay Tab 11. USP Dialog Box Frame Relay Parameters That can be sent via the interface Interface configured to back up this Interface 12. USP Dialog Box Sub-Interfaces Parameters Operational status 20. USP Dialog Box DLCIs Tab 13. USP Dialog Box DLCIs Parameters Backup Interface Configuration Viewing the Backup Interfaces TablePriority of traffic on the selected Dlci Possible priorities include 14. Backup Interfaces Table Parameters Field Backup Interface Wizard Welcome Screen Select Module Select Primary Interface Screen Select Backup Interface Screen Parameters 27. Backup Interface Wizard Confirmation Screen Avaya C360 Manager User Guide 129 130 Avaya C360 Manager User Guide Port Rmon Traffic Graph Pie ChartDisplaying the Port Rmon Window Traffic Types Traffic Types 134 Avaya C360 Manager User Guide Vlan Configuration Overview VLANs Vlan Tags VLANs OverviewMaster Vlan List Viewing the Vlan Configuration Dialog Box Vlan Configuration Dialog Box Vlan Tree Selection List Selection List Fields Port Configuration Area Port Configuration Area Parameters Bind to All The port is bound to all Managing VLANs Creating VLANs Renaming VLANs Rename Vlan Dialog Box Synchronizing Vlan Names Vlan Synchronize Dialog Box Selecting Ports Managing Port Vlan SettingsDeleting VLANs Viewing Port Vlan Settings Using the Port Configuration Area Updating the Device Drag-and-Drop 148 Avaya C360 Manager User Guide Link Aggregation Groups LAGs Overview Viewing the LAG Table LAG Information Dialog Box LAG Wizard Creating LAGsEditing LAGs Welcome Screen LAG Wizard Welcome Screen Base Port Selection Screen LAG Wizard Base Port Selection Screen Member Port Selection Screen LAG Wizard Member Port Selection Screen LAG Name Screen LAG Wizard LAG Name Screen Confirmation Screen LAG Wizard Confirmation Screen Deleting LAGs 158 Avaya C360 Manager User Guide Port Redundancy Overview of Port Redundancy Viewing the Port Redundancy Dialog Box Port Redundancy Dialog Box Port Redundancy Fields 802.1x Tab Adding a Port Redundancy Port Redundancy Wizard Port Redundancy Wizard Welcome Screen Primary Port Selection Screen Port Redundancy Wizard Primary Port Selection Screen Secondary Port Selection Screen Port Redundancy Wizard Secondary Port Selection Screen Name and Type Screen Port Redundancy Wizard Name and Type Screen Port Redundancy Wizard Confirmation Screen Deleting Port Redundancies 170 Avaya C360 Manager User Guide Port Mirroring Overview Configuring Port MirroringPort Mirroring Port Mirroring Wizard Create Welcome Screen Port Mirroring Wizard Create Welcome Edit/Delete Welcome Screen Port Mirroring Wizard Edit/Delete Welcome Screen Source Port Selection Screen Port Mirroring Wizard Source Port Selection Screen Destination Port Selection Screen Port Mirroring Wizard Destination Port Selection Screen Frames Direction Selection Screen Port Mirroring Wizard Frames Direction Selection Screen Port Mirroring Wizard Confirmation Screen IP Multicast Filtering IP Multicast Filtering Overview Configuring IP Multicast Filtering IP Multicast Filtering Dialog Box IP Multicast Filtering Parameters 182 Avaya C360 Manager User Guide Trap Managers Configuration Trap Manager Overview Viewing the Stack Trap Managers Table Stack Trap Manager Table SNMPv1 Legacy Tab Trap Types Icon Trap Description Stack Trap Managers Table SNMPv3 Tab Stack Trap Managers Table SNMPv3 Tab Stack Trap Manager Options SNMPv3 Tab Number of times the device will attempt Viewing the Media Gateway Trap Managers Table Media Gateway Trap Managers Table Media Gateway Trap Types Viewing the WAN Trap Managers Table WAN Trap Managers Table WAN Trap Types Editing Trap Reporting Statuses Editing the Trap Managers TableAdding and Removing Managers 194 Avaya C360 Manager User Guide Switch Connected Addresses Switch Connected Addresses Overview Viewing the Switch Connected Addresses Window Switch Connected Addresses Window Sorting the List of Stations 198 Avaya C360 Manager User Guide 802.1x Port Security Overview Port Security802.1x Port Security Configuring 802.1x Port Security Port Configuration Dialog Box 802.1x Tab Port Configuration Fields 802.1x Tab Forces a reauthentication. Checking MAC Port Security Overview Configuring MAC Port SecurityMAC Port Security MAC Port Security Dialog Box MAC Port Security Parameters 206 Avaya C360 Manager User Guide Routing Manager Router Layer 2 SwitchRouter Modes Avaya C360 Routing Manager User Interface Toolbar Avaya C360 Manager User Guide 211 Table Area Form Area Editing Tables Creating New Table Entries Saving Configuration Changes Saving Table Information as TextRunning Changes Committed Changes Resetting a Router Using Avaya C360 Routing Manager Help 216 Avaya C360 Manager User Guide Device Device Global Parameters Global Parameters Layer VLANs VLANs Window Parameters IP Route IP Global Parameters IP Global Parameters IP Interfaces IP Interface Table Parameters IP network mask of the attached net Routing Table Routing Table Routing Table Parameters Static Preference Routing Table Start Point Dialog Box ARP Table ARP Parameters ARP Table Start Point Dialog Box DHCP/BOOTP Global Parameter DHCP/BOOTP Global Parameter DHCP/BOOTP Parameters DHCP/BOOTP Parameters Method by which the Dhcp relay chooses RIP Global Parameters RIP Global Parameters Controls redistribution of static routes into RIP RIP Interfaces RIP Interface Parameters Router can be configured to operate either If talk-listen, accepts default route entries in RIP Ospf Global Parameters Ospf Global Parameters Administrative status of Ospf in the router Ospf Interfaces 10. Ospf Interfaces Interface state of the Ospf interface Ospf Area Parameters 11. Ospf Area Parameters Ospf Link State Database 14. Ospf Link State Database Window 12. Ospf Link State Database Window 15. Ospf Link State Database Start Point Dialog Box Ospf External Database 13. Ospf External Database Window Ospf Neighbors 17. Ospf Neighbors Window 14. Ospf Neighbors Parameters Vrrp Global Parameters 15. Vrrp Global Parameter Vrrp Table 16. Vrrp Table Parameters State of the virtual router. Possible states Used if the Auth Type is set to Simple. Name of the selected interface Crtp Interfaces17. Crtp Interface Table Parameters Status of RTP compression on this interface Device Manager Menus File MenuView Menu Table A-1. File Menu Device Manager Configure Menu Table A-3. Configure Menu Device ManagerActions Menu Table A-4. Actions Menu Device Manager Tools Menu Help MenuTable A-5. Tools Menu Device Manager Table A-6. Help Menu Device Manager Routing Manager Menus Edit MenuTable A-7. File Menu Routing Manager Table A-8. Edit Menu Routing Manager Table A-11. Help Menu Routing Manager Action MenuTable A-10. Action Menu Routing Manager 260 Avaya C360 Manager User Guide Configuring the Avaya C360 Device Web Management Overview Appendix B Index Numerics Crtp Dhcp 266 Avaya C360 Manager User Guide Ospf RIP Index USP X330WAN 272 Avaya C360 Manager User Guide