Baldor MIN1853 manual Remote Keypad Mounting Template

Remote Keypad Mounting Template

4.0 (101.6)

E 3.25 (82.55)

B

M

1.5(38.1)

Cut–Out

0.5 (12.7)	0.5 (12.7)
Cut–Out	Cut–Out
	2.04
	(51.8)
	3.39
	(86.10)

3.184

(80.87)

3.09
(78.48)	2.0 (50.8)

B 0.23 (5.84)

EM

E

B		(122.88)
M
0.75
(19.0)		4.838
	(111.25)
(105.51)	4.380
4.154
3.034 (77.06)

0.66

(16.7)

ME

Installation Notes.

1.For SAE mounting (6–32 hardware) mark and drill holes “E” with 3/16" drill bit.

2.For metric mounting (M3.5 hardware) mark and drill holes “M” with 3/16" drill bit.

3.For Ball–Head Removable mounting mark and drill holes “B” with 5/32" drill bit.

4.To prevent damage to keypad, mounting screws must not extend more than 0.2" into keypad.

5.To isolate the keypad from the enclosure, use non–conductive mounting hardware.

A-4 Appendix MN1853